O-Ring Mini Implant Servicing Kit
Everything needed to service existing 3M MDI and compatible Mini Implants – One Impression Coping, One Model Analog, One MH-2 Closed Housing, One Yellow Processing O-Ring, Two Black O-Rings, One Purple Extra Strong O-Ring
LODI Drill 2.6mm$49.00
Drill, 2.6mm. Part# 8007369.
Ceka Sol White$310.00
Unique solder that contains its own flux and will solder any combination of precious, non-precious, chrome cobalt, or stainless steel alloys. Sold per gram (price shown reflects average price per 36g sheet). Composition is Au-76.5, Cu-0.4, Ni-16.6, Zn-6.5. Melting Range is 865-930º C. Color is white. For use with Precious and palladium-based alloys, Non-precious alloys, and also with chrome-cobalt alloys.” **Price varies according to gold market**
LOCATOR for Multi-Unit Abutment TI (2-Pack)$260.00
Locator attachment designed to fit on all Preat and Nobel Multi-Unit abutments. A simple way of salvaging extremely divergent implants!
Preci-Clix Yellow Females- Standard (6-Pack)$36.00
Yellow is standard retention. Note the sectional cuts in the females, which allow for the female to flex over the height of contour and engage the undercuts of the sphere. Package of 6.
R-Tx Attachment System, 3.4mm XiVE Connection, 4mm Cuff$155.00
R-Tx Abutment for Dentsply 3.4mm XiVe Connection x 4mm #30711-04
LOCATOR Abutment for 5.0 3i x 3.0mm (Hexed)$119.50
Locator MIS / 3I EXTERNAL HEX IMPLANT (WIDE PLATFORM) Implant Abutment #8822 (ea). 3.0mm cuff. Order #8822. Does not include the 8519-2 male processing package or 8393 tool.
LODI Drill 2.4mm$49.00
Drill, 2.4mm. Part# 8007376.
LOCATOR Abutment for 3.0mm Bicon x 1.0mm$119.50
LOCATOR Abutment for 3.0mm Bicon x 1.0mm. Locator BICON 3.0 POST Implant Abutment #8930. 3.0 POST by 1.0mm cuff. Order #8930. Does not include the 8519-2 male processing package or 8393 tool.
Denture Stippling Mandrel$45.00
Denture Stippling Mandrel. The long lasting steel stippler has a 1/4 inch shaft to fit most standard lathe chucks. The Stippler accepts four straight hand piece burs of your choice–either #2, #4, or #6. The clustered, four-bur pattern develops a realistic patina on denture resin. The stippler is comfortable to use, as the vibration transmitted to your hand is reduced due to the even number of burs. Stippling is done so that food particles have less chance of adhering to the denture base and to create a more natural appearance.