PREAT Precision Attachments

Zest Anchor™ Advanced Generation

Kit Listing

NEW ZAAG

Male freely rotates & moves within the housing, or denture cap. Male is replaced in seconds		Metal denture cap is in denture base resin
Wide band for increased retention area and decreased wear		Strong--wide shank prevents bending and breakage
Titanium coating for hardness and smooth internal surface		New contour adapts better to root

OLD ZEST

To replace the male, must cut out and chairside pick-up in self cure acrylic.		Thin, tapered shank bends and breaks.
Movement is mortar and pestle of male and female, causing wear and frequent replacement.		Spherical shape has retention only at the height of contour--wears fast
		Rough internal surface

INDICATIONS: Overdentures and Partial Dentures: use when non-vital roots or implants are utilized as retaining abutments. The female maybe directly placed into a root, or a coping may be cast against the female. Implant abutment females are also available.

CONTRAINDICATIONS: Not appropriate where a totally rigid connection is required.

FEATURES:

Subgingival connection results in low application of forces near the root center of support--Abutment preservation.
Increased surface areas on both the nylon male and metal female allow for longer attachment life--Reduced servicing.
Instant removal and replacement of males--Eliminates oral chairside male pickup.
Universal joint stress relief with vertical resiliency--Abutment preservation.

Implant	Root	RPD/Retrofit

View ZAAG Individual Components

View ZAAG Instructions

Direct Placement KITS

ZAAG 4011 Standard Kit (4) with 1 step drill

ZAAG 4031 Mini Kit (4) with 1 step drill

Each Kit Contains (from top to bottom): 4 Direct placement females, 4 denture cap males, 4 impression males, 4 female analogues, 4 replacement males, and 4 polishing caps.

On the left: 1 step drill, spacers, and 2 parallel posts.

ZAAG 4010 Standard Refill Kit (4) with no drill

ZAAG 4030 Mini Refill Kit (4) with no drill

Each Refill Kit Contains (from top to bottom): 4 Direct placement females, 4 denture cap males, 4 impression males, 4 female analogues, 4 replacement males, and 4 polishing caps.

On the left: Spacers, and 2 parallel posts.

Direct Placement SPLIT KITS (both regular and mini sizes)

ZAAG 4071 Split Kit (4) with 2 drills

ZAAG 4070 Split Kit (4) with no drills

Each Kit Contains (from top to bottom): 4 Direct placement females (2 standard, 2 mini), 4 denture cap males (2 standard, 2 mini), 4 impression males (2 standard, 2 mini), 4 female analogues (2 standard, 2 mini), 4 replacement males(2 standard, 2 mini), and 4 polishing caps.

On the left: 2 1step drills, spacers, and 4 parallel posts (2 standard, 2 mini).

On the left: Spacers, and 4 parallel posts (2 standard, 2 mini)

Cast Coping KITS

ZAAG 4061 Standard Coping Kit (4) w/drills

ZAAG 4051 Mini Coping Kit (4) w/drills

Each Coping Kit Contains (from top to bottom): 4 denture cap males, 4 impression males, 4 female analogues, 4 replacement males, and 4 polishing caps.

On the left: 1 step drill and sizing bur, 4 cast to females, spacers, and 2 parallel posts.

ZAAG 4060 Standard Refill Coping Kit (4) with no drills

ZAAG 4050 Mini Refill Coping Kit (4) with no drills

Each Refill Coping Kit Contains (from top to bottom): 4 denture cap males, 4 impression males, 4 female analogues, 4 replacement males, and 4 polishing caps.

On the left: 4 cast to females, spacers, and 2 parallel posts

Universal Tool KIT

ZAAG Denture Cap Tool Kit #9201

Used to remove worn males and insert new males.

Includes ZAAG Cap Male Placement Tool (4961), Denture Cap Male Seating Tool (9310) with ZAAG Standard Replacement Male Side & Zest Anchor / ZAAG Mini Replacement Male Side (9311), Seating Tool Metal Pin (9515), ZAAG/Zest Denture Cap Male Coring Tool (9516).