PREAT Precision Attachments

Benefits:

A time tested and proven inexpensive extracoronal attachment system that is:

Easy for a patient to insert and remove
Requires minimal servicing and maintenance
Adapts to all situations
Provides super esthetics--See below!


An upper abutment--very difficult to put an attachment in the anterior and maintain esthetics. The Preci Vertix P provides esthetics in a limited space, plus patient comfort and abutment protection.

Preci-Vertix Kits & Components

Preci-Vertix P Kit (1811)

Extracoronal slide attachment. The male is inclined at 45º for maximum incorporation possibilities and periodontal friendly design. Provides limited resilience and good lateral stabilization of the prosthesis. Kit includes:

6 blue males
6 yellow females
1 insertion tool
1 paralleling mandrel

Preci-Vertix Combi Kit (1812)

Same as Vertix P Kit, but with 2 attachments and the castable female housings .

Kit includes:

2 blue males
2 green castable housings
2 yellow, 2 white, and 2 orange females
1 insertion tool
1 paralleling mandrel

Preci-Vertix Kit (1801)

Extracoronal slide attachment. The burnout plastic male contains the paralleling mandrel. Provides limited resilience and good lateral stabilization of the prosthesis.

Kit includes:

6 blue males
6 yellow females
1 insertion tool

Vertix Castable Housing (1808)

Thin, burnout plastic female housing for solder, bonding, or acrylic retention.

Available in packages of 6 and 50

Vertix Metal Hood (1920)

Metal hood for incorporation into acrylic resin.

Available individually

1752 1753 1754

Authentic Hader Riders (clips)

Yellow = standard retention (1752) 800 grams

White = reduced retention (1753) 600 grams

Red = increased retention (1754) 1000 grams

Available in packages of 6, 24, and 50

Preci Vertix P Male (1813)

The male is inclined at 45degrees for maximum incorporation possibilities and periodontal friendly design. The height of the male is 5.9mm, but may be reduced to 3mm. Please note: the female and housing must be appropriately vertically adjusted if the male is vertically reduced.

Available in packages of 6 and 50

Preci Vertix Male (1803)

Male with built in paralleling mandrel. Remove the mandrel after positioning with a hot tool. The height of the male is 5.9mm, but may be reduced to 3mm.

Available in packages of 6 and 50

Preci Vertix 1843 (each)

Vertix Male in Titanium for laser welding to Titanium Bars.

Vertix Insertion Tool (1804)

Double sided insertion tool for all three retentions of female riders.

One piece per package.

Vertix P Paralleling Mandrel (1815)

Plastic paralleling mandrel for the Vertix P male attachment.

One piece per package.

Preci Vertix Pattern Analogue (1819)

Brass pattern analogue, to be used in cases of relining, or when making a new prosthesis.

Total height: 9.00mm.

1.80mm Ø

2 per package

Preci-Vertix AT Kits & Components

Preci Vertix AT K (1820)

Extracoronal slide attachment. Burn-out plastic male. The friction of the titanium female can be progressively adjusted with screw and plastic friction part. Excellent attachment for lateral stabilization.

Total height: 4.40mm.

May be reduced by 1.00mm at tissue side.

Preci Vertix AT M (1821)

Extracoronal slide attachment. Male in high fusing IRAX alloy for direct casting with precious and palladium based alloys. The friction of the titanium female can be progressively adjusted with screw and plastic friction part. Excellent attachment for lateral stabilization.

Total height: 4.40mm.

May be reduced by 1.00mm at tissue side.

Preci Vertix AT Friction Part (1822)

Replaceable plastic friction part.

Total height: 3.75mm.

Package of 6

Preci Vertix AT M Male (1823)

Male in high fusing IRAX alloy with 45º inclination for maximum incorporation possibilities and periodontal friendly design. For direct casting with precious and palladium based alloys.

Total height: 4.00mm.

1.78mm Ø

Packaged individually

Preci Vertix AT K Male (1824)

Plastic male with 45º inclination for maximum incorporation possibilities and periodontal friendly design. Cast in a hard alloy.

Total height: 4.00mm.

1.78mm Ø

6 males and paralleling mandrel

Preci Vertix AT Female (1826)

Female in Titanax with screw and friction part. May be reduced by 1.00mm at gingival side. Use Ceka Site for fixation; do NOT solder.

Total height: 4.40mm.

Length: 6.00mm

Width: 2.60mm

packaged individually

Preci Vertix AT Activating Screw (1828)

Screw in Titanax to activate the friction part.

Use Ceka Bond as an adhesive and the 1829 screwdriver.

Total height: 3.00mm.

Slot: 0.30mm

M: 1.4

packaged individually

Preci Vertix AT Screwdriver (1829)

Sterilizable Screwdriver for the activation screw.

Total length: 30.00mm.

Blade: 0.30mm

packaged individually

Preci Vertix Pattern Analogue (1819)

Brass pattern analogue, to be used in cases of relining, or when making a new prosthesis.

Total height: 9.00mm.

1.80mm Ø

2 per package

Preci Vertix Paralleling Mandrel (1815)

Plastic paralleling mandrel for the Vertix P male attachment.

One piece per package.

Preci Vertix Duplicating Dummy (1827)

Plastic duplicating dummy to prepare the refractory model of the cast metal partial frame.

Total height: 4.50mm

Length: 6.10mm

Width: 3.10mm

6 per package