Gingival bevel on the male for easy patient insertion
and removal--reduces wear potential.
Retention is fully and easily adjustable by simply
tightening or loosening the screw
Female may be cast against with precious or semi
precious alloy for easy fabrication. A female ceramic former is
available for creating a female in non-precious castings.
Vertical height may be reduced for short or close bite
situations.
Excellent external wall contact for guide plane
stability.
Male may be connected to the cast frame by acrylic
resin, composite resin, or solder. Very easy techniques.
Easy technique to incorporate male housing into cast
chrome cobalt frame.
System allows for conversion of fixed bridge to a
removable partial denture if distal abutments are lost.
Adjustable
Intracoronal Attachment Components
UNOR 10802 Complete
Attachment
Adjustable Male and Female
Not Available
UNOR
Male #10812
Osunor Alloy
Composition: Au 10, Pt 10, Ag 30, Pd 35, Cu 14, Zn 1
Melting Range: 2066-2156º
F
Annealing: 1472º F
for 5 minutes
Hardening: 752º F
for 15 minutes
May be soldered, or retained with composite or
acrylic.
Not Available
UNOR Female #10820
Cerunor Alloy
Composition: Au 60, Pt 10, Pd 20, IR 10
Melting Range: 2552-2741º
F
Annealing: 1832º F
for 15 minutes
Hardening: 1292º F
for 30 minutes
Cast-to with precious or semi-precious alloys.
Cerunor Alloy
Adjustable Male for Bridges
#10813*
Cast with precious or semi-precious alloys
Plastic Male for
Casting, Non-adjustable
#10814*
*Note:
males #10813 and #10814 fit female #10820, allowing for a bridge to be
converted to a removable prosthesis using male #10812 if abutments are lost.
