Preat Perma Fiber & Mesh

 Perma Fiber and Mesh are the ONLY reinforcement materials that acrylic resin will fill thoroughly and bond to.  The initial mixture of acrylic resin will surround completely and bond to each individual glass fiber/mesh because of our PMMA-preimpregnation and SILANE coating of the fibers.

 Fiber and mesh are a scientifically proven solution for composite and acrylic restorations.  Over 10 years of research, 600 clinical cases in collaboration with both foreign and domestic universities, and 60 different publications stand firmly behind this product as the finest reinforcement material available.

EverStick

Pre-wetted E-glass fiber, pre-impregnated with a silane coupler that allows the material to bond to acrylics and composites. 

Since EverStick truly bonds to acrylics and composites, you can grind/polish the prosthesis, adjust high spots, and place the reinforcement where it matters: at the edge to stop cracks/breaks from beginning.

Designed for chairside use for strong, esthetic, minimally invasive procedures.

Fibre-reinforced composite bridges stronger than conventional porcelain fused to metal bridges

Perma Block

Perma Block is a specially designed, cellulose-based caulking and block-out material that is syringe delivered.  Perma Block will adhere to a wet rubber dam, gingival and mucosal tissues and teeth.  It will adhere under water and saliva!

Preat Denture Stippling Mandrel

NEW!

Precision Dial Caliper

ODI OOD

Caliper for all uses--wall and base thickness of crowns, incisal margins, fissures, etc.  Measures to 0.01mm.

Very light and handy, easy to use.

Measuring Range: 0-2mm

Scale: 0.01mm

Precision Dial Caliper

POCO OD

Caliper for all uses--wall and base thickness of crowns, incicsal margins, fissures, etc.  Measures to 0.10mm.

Very light and handy, easy to use.

Measuring Range: 0-2mm

Scale: 0.10mm

Gingivamoll

View Gingivamoll instructions

Gingivamoll is a soft, flexible, silicone rubber removable gingival mask that esthetically replaces lost tissue and provides increased thermal comfort. This removable prosthesis is produced from surgical grade silicone rubber. It provides outstanding esthetics while the ease of insertion and removal provides for good hygiene. The mask is very thin, fits comfortably, and is virtually undetectable in the mouth, blending perfectly with vital tissue. The mask is easy to keep clean, stays soft, and is odorless.

Techniques for fabricating the mask are routine laboratory procedures.

There are two packages available. The starter kit contains all the materials needed to fabricate four masks. The promo kit has the same materials, but also contains three full color patient before and after promotional posters and two videos-- an instructional video for the dentist/laboratory, and a patient video that outlines the procedures and benefits of the prosthesis.

Before

After

Silicone Cutter/Polishers

Silicone Cutter/Polishers are for final adjustment of acrylic denture base resins, eliminating mess and leaving a smooth surface. The mounted Polisher should be used in either a handpiece or lathe at low to moderate speeds with light pressure to ensure efficient removal and polishing of acrylic resin for partial and full dentures. Nine different sizes are available.

Quantity pricing available on orders of 6, 10, 25, and 125.

244 Blue Polishing Paste

Preat 244 Blue Polishing Paste is the finest single step polishing compound available. Water soluble for easy cleaning and elimination of staining to produce a high shine on acrylic, gold, composites, non-precious, and chrome cobalt alloys. It is very clean, polishes fast, and comes in a convenient, clean dispenser. It combines two step polishing and scratch removal in a single step.

Quantity pricing is available on orders of 1, 3 and 12.

244 Blue Polishing Paste

Chairside Adjustment Kit

This denture and partial denture adjustment kit is designed to provide a convenient, clean, fast and functional system for reducing and polishing acrylic denture resin.

• Saves Time--chairside reduction and polishing in seconds
• Eliminates Mess--no messy pumice required
• Fast reduction of acrylic resin
• Silicone Cutter/Polisher leaves a smooth surface for try in
• High lustre Polishing Paste puts a high shine on acrylic in seconds

The kit contains 3 Silicone Cutter/Polishers (F8, F9, F10), 1 tube 244 Blue, and 1 mounted buff wheel.

Do you use thermoplastic/flexible partials?

• 1 tube 244 blue polish
• 1 large unmounted goat hair lathe wheel
• 2 mounted goat hair polishing wheels

Perma Ret

Perma Ret is a simple solution for Permanent Retention of acrylic and composite denture teeth in both full and partial dentures. Drill a small hole in the tooth with the provided twist drill in a handpiece. Cut a length of wire and insert in the wire holder. Thread the wire into the hole in the tooth. Bend the wire into the desired position. Then process the denture base material.

A starter kit contains

• One pin vice for twist drills and wire
• Three twist drills
• 13 lengths of 80mm rhodium coated silver wire (biocompatible and will not corrode!).

Refills of wire, drills, and pin vice also available.

Perma Ret Kit

Goat Hair Brushes with Chamois Insert

Soft goat hair Mounted Polishing brush with chamois inside for long life. 

22mm diameter, 2.34mm length of shank.

6, 12, 36 per package

Goat Hair Wheel with Chamois Insert

Soft goat hair Polishing Wheel with chamois inside for long life.

51mm diameter 

3 and 12 per package

Ceka Sol

Unique solder that contains its own flux and will solder any combination of precious, non-precious, chrome cobalt, or stainless steel alloys.  Available in white or gold color.

Ceka Sol

• Au-80
• Cu-13
• In-5
• Zn-2

• Au-76.5
• Cu-0.4
• Zn-6.5
• Ni-16.6

• Au-42
• Ag-38.5
• Zn-11
• In-8.5

• Au-68
• Ag-13
• Cu-13
• Sn-2
• Zn-5

• Au-10
• Ag-37
• Pd-37
• Cu-12
• Zn-4