Precious threaded metal wire for incorporation into predrilled openings in denture
teeth, providing retention in acrylic resin or composite.
1 Wire Holder
3 Twist drills
13 pieces of 80mm long rhodium coated wire
Perma
Ret Wire Refill
Rhodium coated wire (1.05mm diameter) to provide retention in denture material.
Refill: 13 lengths of 80mm wire
Perma
Ret Twist Drills
Twist drill for handpiece. Used to prepare a threaded recess in denture
teeth for the wire.
Package of 3 twist drills
Perma
Ret Wire Holder
Used to thread in the wire after the threaded recess has been created with the twist
drills. 2 heads on the Wire Holder.
Packaged individually.
Instructions
1
2
3
Determine the exact position
for the Perma Ret Wire. Using the calibrated Perma
Ret Twist Drill in a handpiece, make a small (3mm deep) hole (FIG
1) in the tooth. Cut and place a sufficient length of wire
into the Perma Ret Wire Holder. Thread the precious metal wire into
the threaded hole in the tooth (FIG 2).
Cut the threaded wire to an approximate length of 4mm (FIG
3), flattened or bent to the desired position. Bending the
wire into a "loop" offers maximum retention for acrylic resin.
CR.JPG)
