|
|
The Self-Aligning feature of the LOCATOR attachment allows a patient
to easily seat their overdenture without the need for accurate alignment of the
attachment components.
The unique Dual Retention innovation provides the LOCATOR attachment
with greater retention surface area than ever available before with other
attachments.
Durability tests have proven the LOCATOR's incredible wear resistance
and long lasting performance for over 110,000 insertion cycles.
The LOCATOR Male pivots in its permanent metal denture housing for a genuine
resilient connection of the prosthesis. The retentive nylon male remains in
static contact with the female socket while its metal denture cap has a full
range of rotational movement over the male. This design of the pivoting
LOCATOR Male allows a resilient connection for the overdenture without any
resulting loss of retention.
The LOCATOR attachment is a supra-radicular design that gives you the
choice of a straight post, two angles (10 and 20 degrees) to accommodate
divergent roots and a special Cast-to version. Plus three different retentive
males allow for your choice of regular retention (white), light retention (pink)
or extra-light retention (blue) according to the needs of the patient.
Locator
Kit Listing
| 8011 - LOCATOR STARTER KIT (4
ROOTS) WITH DRILLS
Kit contains: (4) Locator 0º
Degree Females, (4) Male Processing Package (Denture Cap with Black
Processing Male, Clear Nylon Male (5lbs), Pink Nylon
Male (3lbs) Blue Nylon Male (1.5lbs), and Block-Out Spacer), Pilot Drill, Spot-Face Drill and (2)
Parallel Post.
Width of the root surface must equal or exceed 4.0mm.
Also Order: Locator Core Tool (8393)
required for placement procedure. Locator Root Analog (8516) if dental
laboratory is processing the Locator Denture Cap Male into the denture.
|
|
| 8010 - LOCATOR STARTER KIT REFILL
(4 ROOTS)
NO DRILLS
Kit contains: (4) Locator 0º
Degree Female, (4) Male Processing Package (Denture Cap with Black
Processing Male, Clear Nylon Male (5lbs), Pink Nylon
Male (3lbs) Blue Nylon Male (1.5lbs), and Block-Out Spacer) and (2) Parallel Post
|
|
| 8051 - LOCATOR COPING KIT (4 ROOTS)
WITH DRILLS
Kit contains: (4) Locator 0º
Degree Cast-To Female, (4) Male Processing Package (Denture Cap with Black
Processing Male, Clear Nylon Male (5lbs), Pink Nylon
Male (3lbs) Blue Nylon Male (1.5lbs), and Block-Out Spacer), Pilot Drill, Spot-Face Drill and (2)
Parallel Post.
Note: The majority of the outer surface on the base of the Locator
Cast-To Female must remain above the level of the coping to allow the male
to snap in without interference. Root surface must equal or exceed 4mm.
Also Order: Locator Core Tool (8393)
required for placement procedure. Locator Root Analog (8516) if dental
laboratory is processing the Locator Denture Cap Male into the denture.
Vertical Requirement: 4mm |
|
| 8050 - LOCATOR COPING KIT REFILL (4
ROOTS)
NO DRILLS
Kit contains: (4) Locator 0º
Degree Cast-To Female, (4) Male Processing Package (Denture Cap with Black
Processing Male, Clear Nylon Male (5lbs), Pink Nylon
Male (3lbs) Blue Nylon Male (1.5lbs), and Block-Out Spacer) and (2) Parallel Post.
IMPORTANT NOTE: Do not allow the casting temperature to raise above 2000
F which will melt the stainless steel female. Do not use a bur to remove
investment, sandblasting with aluminum oxide, or an acid pickling solution,
can damage the internal socket of the female attachment.
|
|
| 8071 - LOCATOR MIXED KIT (4 ROOTS)
WITH DRILLS
Kit contains: (2) Locator 0º
Degree Females, (1) 10º
Degree Female, (1) 20º
Degree Female, (4) Male Processing Package
(Denture Cap with Black
Processing Male, Clear Nylon Male (5lbs), Pink Nylon
Male (3lbs) Blue Nylon Male (1.5lbs), and Block-Out Spacer), Pilot Drill, Spot-Face
Drill and (2) Parallel Post.
Width of the root surface must equal or exceed 4.0mm.
Also Order: Locator Core Tool (8393)
required for placement procedure. Locator Root Analog (8516) if dental
laboratory is processing the Locator Denture Cap Male into the denture.
|
|
| 8070 - LOCATOR MIXED KIT REFILL (4
ROOTS)
NO DRILLS
Kit contains: (2) Locator 0º
Degree Female, (1) 10º
Degree Female, (1) 20º
Degree Female, (4) Male Processing Package (Denture Cap with Black
Processing Male, Clear Nylon Male (5lbs), Pink Nylon
Male (3lbs) Blue Nylon Male (1.5lbs), and Block-Out Spacer) and (2) Parallel Post.
|
|
|
