Preci Vertix 1843 (each)

Vertix Male in Titanium for laser welding to Titanium Bars.

Fits the existing line of Vertix females and hoods.

Also order: Paralleling Mandrel (9107) and extra Block-Out Spacers (8514)

Save 10% and order 8588-10 (5 packs of 2)

CSA TI Laser Male (2 pack)

Titanium sphere with 1.80mm diameter.  May be incorporated on top, or side of TI bar. TiN coated for maximum hardness.

• Total vertical height: 4.5mm
• Total facial/lingual width: 3.5mm
• Total depth: 1.1mm

#1265 Preci Clix TI

Overdenture attachment with replaceable male and female components.   The user may laser weld the Titanium threaded base ring into either a coping or bar.  The sphere then threads into the base ring.  Using Ceka Bond will stop any potential gradual unthreading of the male.

Total vertical required:  4.0mm

Housing:

• Height 2.65mm

• 4.00mm Ø

Sphere:

• 2.25mm Ø,
• 0.9mm internal hex

Base Ring:

• 1.3mm ↕ vertical
• 3.40mm Ø,

Ceka M2 Revax Attachment

The M2 attachment with the spring pin retention part ( NEW: RE 0065) for laser connection to the cast frame, and the Titanax female for the bonding technique (includes female keepers 30, 45, and 60 degrees).  Complete attachment:  # RE 0165 TI.

Benefits:

• Casting may be in any alloy
• Minimal space requirements
• No miscast or devesting errors.  The accurate titanium female insert is bonded in after all other procedures are comleted.
• The abutment crowns and female attachment may be altered if necessary after try-in.
• a strong laser connection to the cast metal frame is used when vertical space is limited, or the patient exhibits a very strong bite.

Ceka M3 Revax Attachment

The M3 attachment with the spring pin retention part ( NEW: 694 AL) for laser connection to the cast frame, and the Titanax female for the bonding technique (includes female keepers 30, 45, and 60 degrees).  Complete attachment:   # OL 0265 TI.

Benefits:

• Casting may be in any alloy
• No miscast or devesting errors.  The accurate titanium female insert is bonded in after all other procedures are comleted.
• The abutment crowns and female attachment may be altered if necessary after try-in.
• A strong laser connection to the cast metal frame is used when vertical space is limited, or the patient exhibits a very strong bite.

Preci Bar Laser--Standard and Mini

The Preci Bar, a "U" shaped bar attachment, now has the bar available in Titanium for laser connection.  The rigid Preci Bar Standard ( Large) comes with the Titanium bar and an Orax female rider.  The standard size bar has a height of 3mm, a length of 50mm, and the diameter is 2.2mm.The resilient Preci Bar Mini also comes with the Titanium bar and an Orax female rider.  The mini bar has a height of 2.3mm, a length of 50mm, and a diameter of 1.6mm.  Both size bars are also available separately.

Preci Clip/Round Bar for Laser

The Preci Clip Bar for Laser is a round bar made of pure titanium for laser connection.   The bar is 50mm in length with a diameter of 1.8mm.   The bar is available individually--#1109B--or with 2 ackermann riders.    Select either the Orax ( gold) riders--#1115--or the Inox (stainless steel) rider--#1116.

1 set:

5 set:

Standard plastic extension only: IMP-BC-51/2

Brass Space Maintainer to process the plastic extension: IMP-BH-081, IMP-BH-085 (5). 

1 set:

5 set:

Conical plastic extension only: IMP-ED-021/2

Brass Conical Space Maintainer: IMP-ED-011, IMP-ED-015 (5)

1 set:

5 set:

Mini conical plastic extension only: IMP-ED-021/2  

Brass Mini Conical Space Maintainer: IMP-MD-011, IMP-MD-015. 

1 set:

5 set: