|
|
|
Preci Clix
The
All A-Round Ball that really Clicks! |
All previous balls--on overdentures for roots and implants, on crowns for removable
partial dentures, and on top of bars for implant or root supported bridges--engaged the
height of contour of the sphere to provide retention. This small area, or band of
retention, may lead to early attachment wear and possibly frequent adjustment or
replacement of the female unit.
| The Clix design allows the female to engage all around the
ball for an increased area of retention.
Besides far greater retention
than other spherical systems, the Clix offers the
patient security of an audible click. |
 |
 |
| Less wear. Less servicing. Less replacement of worn females.
When servicing is required, three retentions of females
are available, along with the option of replacing the threaded sphere. |
Another unique feature of the Preci Clix System is the
availability of a
female paralleling mandrel. If the attachments
are not parallel, the correction may be made by paralleling the female
without sacrificing any retention or stability.
 |
|
 |
| Non-parallel females have a
difficult path of insertion and removal, leading to increased wear on the
attachment. The non-parallel females do not allow the prosthesis to
rotate. |
|
Parallel females have an
easy path of insertion and removal, decreasing wear on the attachment.
This also allows the prosthesis to freely rotate.
30º is about the maximum
divergence where the Clix females can still engage the undercut of the
sphere. |
Increased options and techniques for fixing the sphere to a crown, coping, root, or
bar.
The basic premise of this attachment is to allow the user flexibility. The user
can make an overdenture stud,
overdenture bar, and 30, 45, or 60 degree (
assures the best tooth and tissue alignment while reducing forces, assuring good
hygienic access, and allowing maximum space for the removable partial denture)
extracoronal partial denture from the same simple kit.
Attachment and Kit
Listing
#1251 Preci
Clix ATI
Axial attachment with plastic male for incorporation into post copings
or bars. The 1230 cup
bur is recommended to finish the cast sphere. Do
NOT sandblast the sphere. This leaves the ball rough, causing
extreme wear. Rubber wheeling and high polishing often leave a ball
that is out of shape, no longer fitting the female. Instead, remove
the investment with an acid substitute or glass beads.
Total vertical required: 4.0mm
Preci Clix 1251
Instructions |
|
 |
Housing:
Sphere:
-
Height 2.40mm
-
2.25mm Ø
sphere
|
#1261 Preci
Clix CV
Overdenture attachment with replaceable male
and female components. The user
may cast, solder, or laser weld the threaded base ring into either a coping or
bar. The sphere then threads into the base ring.
Using Ceka Bond will stop any potential gradual unthreading of the male.
Total vertical required: 4.0mm
Preci Clix 1261
Instructions |
|
|
Housing:
Sphere:
- 2.25mm Ø,
- 0.9mm internal hex
Base Ring:
- 1.3mm ↕ vertical
- 3.40mm Ø,
|
#1265 Preci
Clix TI
Overdenture attachment with replaceable male
and female components. The user may laser
weld the Titanium threaded base ring into either a coping or
bar. The sphere then threads into the base ring.
Using Ceka Bond will stop any potential gradual unthreading of the male.
Total vertical required: 4.0mm
|
|
|
Housing:
Sphere:
- 2.25mm Ø,
- 0.9mm internal hex
Base Ring:
- 1.3mm ↕ vertical
- 3.40mm Ø,
|
# 1271 Preci
Clix Ti-Ti
This "all-in-one" attachment can be used for removable
partial dentures, bridges, overdenture studs, and overdenture bars.
The green plastic patterns may be cast in any dental alloy, and the titanium
male is then bonded in with Ceka Site.
This allows the user the convenience of direct casting and an accurate,
smooth ball.
Total vertical required: 4.0mm
Preci Clix 1271
Instructions |
|
|
Housing:
Sphere:
Plastic Keepers:
-
Internal Ø :
2.35mm
-
External
Ø : 3.40mm
|
# 1276 Preci
Clix Ti-V
This "all-in-one" attachment can be used for removable
partial dentures, bridges, overdenture studs, and overdenture bars.
The green plastic patterns may be cast in any dental alloy, and the titanium threaded male is bonded in with Ceka Site, and the 1206C male simply threads in for maximum incorporation possibilities.
This allows the user the convenience of direct casting and a replaceable accurate,
smooth ball.
Total vertical required: 4.0mm
Preci Clix 1276 Instructions |
|
|
Housing:
Sphere:
Plastic Keepers:
-
Internal Ø :
2.35mm
-
External Ø : 3.40mm
|
#1281 Preci
Clix TI-P
The same attachment as the Preci Clix 1271 Ti-Ti with one difference: a castable
sphere pattern. The 1230 cup
bur is recommended to finish the cast sphere.
Do NOT sandblast the casting.
This leaves the ball rough, causing extreme wear. Rubber wheeling and high polishing
often leave a ball that is out of shape, no longer fitting the female. Instead,
remove the investment with an acid substitute or glass beads.
Total vertical required: 4.0mm
Preci Clix 1281 Instructions |
|
|
Housing:
Sphere:
Plastic Keepers:
-
Internal Ø :
2.35mm
-
External
Ø : 3.40mm
|
#1291 Preci
Clix RTI
Direct placement overdenture with titanium post.
Three specially calibrated burs are used to prepare the canal. Glass
ionomer is used to secure the post. The sphere threads directly into the post. The female may be picked up intra-oral
or laboratory processed into the prosthesis.
Total vertical required: 4.0mm
Preci Clix 1291 DDS and Lab
Instructions |
|
|
Housing:
Sphere:
- 2.25mm Ø,
- 0.9mm internal hex
Post:
- 7.0mm length
- 1.3mm post Ø
- 3.4mm base Ø
|
#1293 Preci
Clix RCT
Direct placement overdenture with titanium ball and post. Three specially calibrated burs are used to prepare the canal. Glass
ionomer is used to secure the post. The female may be picked up intra-oral
or laboratory processed into the prosthesis.
Total vertical required: 4.0mm
Preci Clix 1293 DDS and Lab
Instructions
Get a free 1293 attachment! |
|
Housing:
Sphere:
Post:
- 7.0mm length
- 1.3mm post Ø
- 3.4mm base Ø
|
Clix Starter Kits
| Preci
Clix 1265 Starter Kit |
|
|
|
Preci
Clix 1276 Starter Kit |
|
|
| |
|
| Preci
Clix 1299 Starter Kit
 |
|
1299 Kit
Includes:
-
1291 attachments (2)
-
REH2 Impression Tool
(2)
-
REH14 Female Analogue
(2)
-
1222 female insertion
tool (1)
-
Clix Female combo pack
(2 of each color)
-
1226 bur set
-
Clix male screwdriver
(1)
-
Ceka Bond (1 tube)
|
|
|
Preci Clix 1291 DDS and Lab
Instructions |
|
